The process control system for sewage treatment plants and sewer network operators with the highest demands on safety, function and comfort.

ARAbella local process control system

Process control system for sewage treatment plant and sewer system Waste water plants become controllable with the process control system ARAbella in the simplest way. Via the intuitive user interface, the processes of wastewater treatment plants and outdoor structures can be operated quickly, easily and reliably. The operating status of the plants is clearly displayed at any time.

Robust, transparent, accurate, fast, low maintenance and reliable for wastewater, raw wastewater and rainwater.

IDM-based pneumatic outflow control

Precise drain throttle for heavily polluted waste water. The IDM flow measurement for full filling is the central element of the almost self-cleaning, remotely operated and highly precise pneumatic discharge control PNA. The reliable and never-tiring flap with pneumatic drive and the pinch valve react quickly to changing flows and conditions.

Rainwater treatment at the wastewater treatment plant without overloading the combined sewer system

INKA road drainage system

The INKA-controlled road drainage system allows contaminated rainwater to be safely routed to the wastewater treatment plant, while uncontaminated rainwater is routed directly to the separate system/watercourse. The first rainwater that washes off the First-Flush is collected in a storage pipe under the road and retained until the combined sewer system has the hydraulic capacity to safely discharge the volumes to the wastewater treatment plant.

LDM partially filled waste water flow measurement

Ultrasonic transit time difference flow measurement for wastewater, raw wastewater and rainwater

LDM partially filled Flow measurement

Highly precise flow value acquisition. The LDM is a calibrated measuring device for backflow-free flow measurement of waste water in open channels or free flowing lines. 10 flow velocity measuring sections distributed over the entire cross section provide most accurate flow values when the sensor is partially or fully filled. The level measurement is integrated in the device housing.

LDM-controlled pneumatic discharge control with, throttle with partially filled flow measurement

Flow measurement and discharge control for wastewater, raw wastewater and rainwater in partially and fully filled pipes.

LDM-based pneumatic discharge control

Most reliable waste water throttle and discharge control with accurate flow measurement for partial filling and dry installation. The fast, almost self-cleaning and remotely controllable pneumatically driven pinch valve is based on the LDM flow measurement integrated in the system and limits waste water, raw waste water and rainwater quantities to a value that can be set as required.

The reliable discharge control for wastewater and rainwater

Pneumatic discharge control partially filled TF-PNA

Precise and easy to maintain throttle system for stormwater tanks and wastewater structures. The fast, almost self-cleaning and remotely controllable butterfly valve with pneumatic actuator is based on the flow measurement integrated in the system and limits the flow to an arbitrarily adjustable quantity. As long as the maximum flow is not reached, the flap remains open, while the flow measurement system measures precisely even when partially filled.

Temporary use of the proven MID for full filling to collect high-precision measurement data.

Portable flow measurement with MID

Waste water and external water flow measurement Measurements are performed with a high-precision, portable MID flowmeter mechanically protected by a plastic layer, which is normally installed in existing shafts and ducts without structural modifications. A bypass cushion completely seals the channel cross section and guides the entire water quantity completely through the measuring system.

Special solutions for measuring wastewater, raw wastewater and rainwater under the most difficult conditions.

Stationary flow measurement for wastewater

When the impossible becomes possible. High flow velocities, steep gradients, tight spaces, large measuring range. The more difficult the measuring task, the more suitable is the stationary flow measurement, which can often be retrofitted in existing structures and shafts.

STEBAcam for monitoring automatic plants

Plant monitoring via camera image directly in the process control system.

STEBAcam ATEX

Plant monitoring without travel. You can define the intervals at which images are to be saved in addition to the live monitoring. In the process control system there are different tools available for image evaluation, so they can be displayed parallel to the hydrographs or also played as a film in different speeds.

Ultrasonic transit time difference measurement with dry weather gutter

TF Stationary flow measurement partially filled

The TF Stationary Flow Measurement is a calibrated measuring channel for backflow-free flow measurement of wastewater, raw wastewater and rainwater in open channels or open channels.

Electrical engineering with practical experience

Electrical planning

We are passionately committed to finding the optimal solution. In doing so, the trustful and close cooperation with the operator and planner is particularly important to us. Our company history began back in the 1960s; the large number of projects realised since then has provided us with extensive expert knowledge in industrial automation and electrical planning.

Holistic solutions for highest quality and simple project structures.

General Equipment

With a company history that began in the 1960s, we are one of the leading companies in the project planning and realisation of reliable, precise and holistic solutions in the automation industry. Our project team consists of automation, electrical and software engineers, design and mechanical engineers, project managers, as well as installers and service technicians.

Application: Efficiency monitoring / function control of street sewage treatment

ARAbella local process control system

IDM-based pneumatic outflow control

INKA road drainage system

LDM partially filled Flow measurement

LDM-based pneumatic discharge control

Pneumatic discharge control partially filled TF-PNA

Portable flow measurement with MID

Stationary flow measurement for wastewater

STEBAcam ATEX

TF Stationary flow measurement partially filled

Electrical planning

General Equipment

Follow us …

Offers, solutions and services

Topics

Search

Industries

Field of application